veloretti
| Data specifications of the connected product | Data Generation Capacity | Data storage | Access and Management of Data | ||||
|---|---|---|---|---|---|---|---|
| Components | Type (all types of generated data, e.g. mileage, battery range) | format (format used to share data with User or Third Parties, e.g. CSV / Excel / Json) | estimated volume of data generated (frequency of sampling and/or publishing) | Confirm that the product can generate data continuously and in real-time (y/n) | product stores data on the device or a remote server (local / remote / both / not applicable) | retention period (how long is data retained, i.e. days/week/month or untill termination of the subscription) | Request a detailed explanation of how users can access, retrieve, or delete data, including technical means and terms of use. Including the URL of the Suppliers website to which Pon.Bike can refer the User |
| Bafang M200 motor - MM G210.250.C | Rider Effort & Physical Input - Torque sensor value (voltage in mV) - Cadence (RPM)* - Human power output (W) - Calories burned (kcal) - Pedal sensor signal (voltage waveform — implicit via frame updates) Motion & Ride Metrics - Speed (0.01 km/h)* - Trip distance (0.01 km)* - Total mileage (km)* - Remaining distance (0.01 km)* - Average speed (0.1 km/h) - Maximum speed (0.1 km/h) - Maintenance mileage counter (0.1 km) - Pulse count per 10s (used for distance/speed estimation) - Wheel RPM* - Wheel speed counter (for syncing/diagnostics) - Speed signal interval (ms) - Cadence counter of crank Settings & Firmware - Maximum speed setting* - Firmware version* Motor & Controller Measurements - Motor temperature (°C, offset by 40) - Controller temperature (°C, offset by 40) - Motor output current in overload (adjusted when hot) - Duty cycle factor (full load %) - Back-EMF factor (0.001 V/RPM, measured per model but can also be inferred live) | CAN 2.0B | The data is real-time | Yes | Local *This data is shared with electronical connected components. These components are also specified in this table. | Historic data will be overwritten when the value changes. *Data can only be shared via electronically connected third party components. The components that retreive and store this data are included in this table. | Users can access data: No Users can retrieve data: No Users can delete data: No Technical means Users: N/A |
| Bafang M210 motor - MM G2300.250.C | Rider Effort & Physical Input - Torque sensor value (voltage in mV) - Cadence (RPM)* - Human power output (W) - Calories burned (kcal) - Pedal sensor signal (voltage waveform — implicit via frame updates) Motion & Ride Metrics - Speed (0.01 km/h)* - Trip distance (0.01 km)* - Total mileage (km)* - Remaining distance (0.01 km)* - Average speed (0.1 km/h) - Maximum speed (0.1 km/h) - Maintenance mileage counter (0.1 km) - Pulse count per 10s (used for distance/speed estimation) - Wheel RPM* - Wheel speed counter (for syncing/diagnostics) - Speed signal interval (ms) - Cadence counter of crank Settings & Firmware - Maximum speed setting* - Firmware version* Motor & Controller Measurements - Motor temperature (°C, offset by 40) - Controller temperature (°C, offset by 40) - Motor output current in overload (adjusted when hot) - Duty cycle factor (full load %) - Back-EMF factor (0.001 V/RPM, measured per model but can also be inferred live) | CAN 2.0B | The data is real-time | Yes | Local *This data is shared with electronical connected components. These components are also specified in this table. | Historic data will be overwritten when the value changes. *Data can only be shared via electronically connected third party components. The components that retreive and store this data are included in this table. | Users can access data: No Users can retrieve data: No Users can delete data: No Technical means Users:N/A |
| Bafang Battery 540Wh - BT F340.B540.C | - Battery voltage (0.01 V) - Battery current (0.01 A, signed: +charging / –discharging) - Battery temperature (°C, offset by 40) - Battery capacity (absolute and relative %) - SOH (State of Health)* - Residual battery capacity (mAh) - Total battery capacity (mAh) - Current load on servo motor (mA) (from shifter) - Battery cell voltages (for each of 1–32 cells) - Firmware version* | CAN 2.0B | The data is real-time | Yes | Local *This data is shared with electronical connected components. These components are also specified in this table. | Historic data will be overwritten when the value changes. *Data can only be shared via electronically connected third party components. The components that retreive and store this data are included in this table. | Users can access data: No Users can retrieve data: No Users can delete data: No Technical means Users:N/A |
| IOT tracker | - timestamp - 1st bike battery SoC - speed - 1st bike battery voltage - assist_level - light_status - backup_battery_state_of_charge - backup_battery_voltage - backup_battery_temperature - Firmware version* - gsm_asu - gps_valid - gsm_status - gps_hdop - gps_lat** - gps_lon** | Json | Data points sampled on device every 10 seconds, sending sampled data to cloud every 4 minutes | The module samples the data on the device and sends it if it has connection to the cloud every 4 minutes | Both (local only temporary until offloaded to the cloud) | Comodule Cloud: until end of the data subscription.(4 years). *This data is shared with Veloretti Cloud and will be saved indefintely. This data is only linked to the frame number. **This data is shared with the Veloretti Cloud when the Veloretti app user request the location of the bike. This data will be removed after it's shared with the Veloretti App of the user due to privacy reasons. | Users can access data: No (Yes for * and **. Via app) Users can retrieve data: No (Yes for * and **. Via app or API) Users can delete data: No Technical means Users: API or Veloretti app Terms of Use: https://cdn.shopify.com/s/files/1/2699/8854/files/240610_GENERAL_TERMS_AND_CONDITIONS_OF_DELIVERY_TO_CONSUMERS.pdf?v=1718113400 Website: https://www.veloretti.com/ |
| Enviolo Automatic Hub Interface | - ODO* - Vehicle Speed - Rider cadence* - Calibrated wheel size (circumference in mm) - Identification (Serial, Mac address, HW version, FW version)* - Front sprocket - Rear sprocket - Wheel circumference - Cadence setpoint - Start-after-stop setting - CAN protocol - Hub type - Motor type - Error flags - Bike details (Brand, model, MY) | .csv export available on demand Direct access via enviolo App (Available via Apple or Google Play Store) | Except Odometer and active wheel and cadence, data is static data and will only be transferred on connection of the Automatic Hub Interface to the enviolo App | Data is collected, but data sharing is only enabled via enviolo App Bluetooth connection | Data gets stored on the device and gets synced with Backend upon connection with the enviolo App *This data is shared with electronical connected components. These components are also specified in this table. | Data is retained as long as the device has memory space | Users can access data: yes via Enviolo App Users can retrieve data: Theoretical via request and transmission of *.csv file Users can delete data: no Technical means Users: Via enviolo App Terms of Use: https://enviolo.com/privacy/ Website: www.enviolo.com |
| Veloretti display | 1. - ODO* - Assist level - Cadence setting - Safety tracking status (on/off) - Maximum speed setting* - Firmware version display* - Firmware version motor* - Firmware version battery* - Firmware version Enviolo AutomatiQ* - Firmware version Experience module* 2. - Light status (on/off) - Trip distance | CAN 2.0B, Json | The data is real-time | Yes, the data is real-time | Local *This data is shared with electronical connected components. These components are also specified in this table. | 1: Data is retained as long as the device has memory space. 2: One usage cycle. When bike is turned off everything will be deleted. *This data will be indefintely stored in the Veloretti Cloud and linked to only the framenumber. | Users can access data: yes, via Veloretti app Users can retrieve data: yes, via Veloretti app. Cloud data can also be retrieved via API(*). Users can delete data: No Technical means Users: Owner of E-bike via app Terms of Use: https://cdn.shopify.com/s/files/1/2699/8854/files/240610_GENERAL_TERMS_AND_CONDITIONS_OF_DELIVERY_TO_CONSUMERS.pdf?v=1718113400 Website: https://www.veloretti.com/ |
| Experience module | - Rider cadence - Firmware version* | CAN 2.0B | The data is real-time | Yes | Local *This data is shared with electronical connected components. These components are also specified in this table. | Historic data will be overwritten when the value changes. *Data can only be shared via electronically connected third party components. The components that retreive and store this data are included in this table. | Users can access data: No (*Yes, via app and API) Users can retrieve data: No (*Yes, via app and API) Users can delete data: No Technical means Users: via API or app Terms of Use: https://cdn.shopify.com/s/files/1/2699/8854/files/240610_GENERAL_TERMS_AND_CONDITIONS_OF_DELIVERY_TO_CONSUMERS.pdf?v=1718113400 Website: https://www.veloretti.com/ |